Recording Transmitter
The max. 50,000 recording
Bus line RS485 protocol
Single 3.6V/2400mAh Lithium
MPM280PD1S
Used For
Refrigeration equipment and Air conditioner, CIP or SIP online cleaning or sterilization system
Leave a MessageMPM280PD1S Sanitary Pressure Sensor is designed for high-temperature sanitary medium. Considering the need for cleaning, hygienic products have the characteristics of easy cleaning and disinfection. The diaphragm is less prone to bacteria or dirt to ensure a high standard of hygiene. There are two connections male thread and clamp. MPM280PD1S is more suitable for the pharmaceutical, food, and beverage industries. It can also be used for pressure detection in some measurement medium scenarios that may be contaminated.
Feature
• Various Fuid Media Measurement
• Easy for Cleaning
• Hygienic structure optional(Ra<0.4μm)
• Tnegtive pressure measurement: -1bar
Image:
MPM280PD1S Sanitary Pressure Sensor is designed for high-temperature sanitary medium. Considering the need for cleaning, hygienic products have the characteristics of easy cleaning and disinfection. The diaphragm is less prone to bacteria or dirt to ensure a high standard of hygiene. There are two connections male thread and clamp. MPM280PD1S is more suitable for the pharmaceutical, food, and beverage industries. It can also be used for pressure detection in some measurement medium scenarios that may be contaminated.
Feature
• Various Fuid Media Measurement
• Easy for Cleaning
• Hygienic structure optional(Ra<0.4μm)
• Tnegtive pressure measurement: -1bar
The max. 50,000 recording
Bus line RS485 protocol
Single 3.6V/2400mAh Lithium
Pressure type: Gauge
Range: 0.1bar~25bar
Output signal: 4~20mA, 4~20mA+HART, Modbus-RTU/RS485 and others
Reference accuracy: ±0.2% upper range limit, maximum ±0.5% upper range limit
Volume flux measurement
RS485 communication protocol
RS232 communication protocol
Deionized water is commonly used in industrial manufacturing cleaning processes. The target pressure values should be achieved during the production. It is necessary to monitor the pressure of the inlet and outlet. Only no blockages or leaks ensure normal operation of the production process.
more info...By monitoring the sewage flow, pipeline pressure and reservoir level, the efficiency of sewage treatment plant can be improved. At the same time, it can also facilitate operation and management, and achieve energy saving and automation control.
more info...Real-time monitoring the low-ling areas, underpasses and bridge culverts. The current level and alarming messages are automatically displayed on the screen, such as “Passage”, “Allowing”, and “No entering”. The alarm will be triggered when the level is too high, aiming to ensure the personnel's safety.
more info...The MVR evaporation equipment requires the use of intelligent pressure transmitters to monitor the liquid level in the separator for feed control. It also monitors the liquid level in the condensate tank, providing timely water replenishment for the condenser, allowing it to condense rapidly. Concurrently, the liquid level height of the raw material tank and the mother liquor tank is monitored. When the liquid level is depleted, raw liquid is added to maintain the normal progress of the process. Intelligent temperature transmitters are used to monitor the steam temperature in the heater, continuously heating the raw liquid for the separation of the solution and the solute. It also monitors the temperature of the separator cavity for efficient separation of the solute and solvent. Flowmeters are used to calculate the volume of the raw material liquid in the feed pump, accumulating the flow.
more info...