中文 |English |Deutsch |Pусск
Earth1006 Remote Monitoring Terminal
Earth1006 Remote Monitoring Terminal

·IP68 protection, dust-proof and water-proof;
·Multiple power supply options are available;
·Wireless transmission, no field wiring;
·Wide range measurement, pressure, temperature, level, flow, image, drain well cover etc.;

Features

·IP68 protection, dust-proof and water-proof;

·Multiple power supply options are available;

·Wireless transmission, no field wiring;

·Wide range measurement, pressure, temperature, level, flow, image, drain well cover etc.;

·Muti-channel, max. 8-way sensor parameters access;

·Remote setting for collection, transmission and image interval;

·Sensor available with upper and lower limit of threshold value and web real-time warning;

·PC and mobile terminal data application;

·Support customer self-built system and configuration application;

·Provide mounting accessories;

·Solution for underground well.


Introduction

Earth1006 Remote Monitoring Terminal is a compact device with battery supply, ultra-low power consumption, IP68 protection, wireless communication and various sensor data collection function,in specific circumstance, multiple power supply options are available. It is suitable for the monitoring fields without power supply condition and the harsh environment. It could realize the multi-function including data collection, storage, alarming and transmission for underground water, firefighting water, dam water, water supply and drainage pipeline.

With a wide coverage of wireless network, Earth1006 remote monitoring terminal could detect the real-time data of many monitoring sites in a wide range of areas like tap-water pipeline pressure, flow, underground water, agricultural irrigation, dam level, water monitoring, wind, rain, ambient temperature and humidity, air quality monitoring, water flow monitoring, image and firefighting pipeline monitoring, especially suitable for Underground Well detection application in a harsh environment.


Specifications

Power

Power Supply

Non-Recyclable Battery

12V~28V DC

110V~240V AC

Solar Power

Battery Capacity

56Ah/14.4V

External Power Supply

External Power Supply

20.8Ah/14.4V

Solar Panel: 20W

Battery Lifetime

3~5 years (Related to transmission frequency)

\

\

More than 1 month

(Related to feed )

Feed

100mA/14.4V DC

100mA /12V~28V DC

100mA

/12V DC

100mA/14.4V DC

Power Consumption

Sleep Current ≤30uA/14.4V

Transmission Average Current ≤50mA/14.4V

Interface Parameters

Interface

AI

DI/PI

RS485

Camera

Count

3

2

1

1

Signal

0V~5V DC/

4mA~20mA DC

Switch/Pulse

ModBus RTU

\

Notes

Collection accuracy

±0.5%FS

\

Max.3-ch sensor parametric analysis,

It’s also used in parameter settings

RS485

Data Transmission

Communication Mode

Standard/Band

Transmission Distance

2G

GSM 850/900/1800/1900MHz

Global Bands

Multi-Bands

China

TDD-LTE B38/B39/B40/B41

FDD-LTE B1/B3/B8

TD-SCDMA B34/B39

WCDMA B1

CDMA 1X/EVDO BC0

GSM/GPRS/EDGE B3/B8

Global Bands

EMEA/

Korea/

Thailand/

India

FDD-LTE B1/B3/B5/B7/B8/B20

WCDMA B1/B5/B8

GSM/GPRS/EDGE B3/B8

North America

FDD-LTE B2/B4/B12

WCMDA B2/B5

South America/

Australia/

New Zealand/

Taiwan

TDD-LTE B40

FDD-LTE B1/B2/B3/B4/B5/B7/B8/B28

WCDMA B1/B2/B5/B8

GSM/GPRS/EDGE B2/B3/B5/B8

Japan

FDD-LTE B1/B3/B8/B18/B19/B26

NB-IoT

B1/B3/B8/B5/B20/B28

Global Bands

LoRa

433/470/868/915MHz

≤5km (According to site environment)

Wake-up mode: magnetic activation/ timing/ alarm wake-up

Collection interval: 1,5,10,30,60,360,720,1440 minutes optional

Transmission interval: 1,5,10,30,60,360,720,1440 minutes optional

Image interval: 30,60,720,1440 minutes optional

Upload information: sensor data, battery information, network status, self check information

Data Storage

Local storage, Flash 4 MB (more than 200,000 history storage space)

Configuration

Configuration mode: local/remote

Environmental Conditions

Operation temp.: -20℃~70℃

Storage temp.: -40℃~85℃

Display

Segment LCD with backlight

Other Specifications

Protection: IP68

Housing: PA6+30% GF

Installation method: hoop and wall mounting

Outline dimension: 147×262.5×105.5mm

Weight: about 2.3kg

Accessories: fixed support×1, magnetic bar×1, M5 bolt×1, ф8mm expansion bolt×3, ф200mm hoop×2


System Topology

topology diagram for earth1006 remote monitoring terminal 

Above sensors can be used together with Earth 1006. It supports up to 8-way sensors input and the sensors can be selected according to customer’s needs. And other sensors are also available.

Outline Construction (Unit: mm)

picture of earth1006 remote monitoring terminal 

Installation Method

hoop installation of earth1006 remote monitoring terminal wall-mount installation of earth1006 remote monitoring terminal 

Earth1006 Remote Monitoring Terminal uses hoop and wall-mounting method which are easy for installation and convenient for maintenance and we also provide installation accessories.

Underground Well Applications

level measurement with earth1006 remote monitoring terminal well cover monitoring with earth1006 remote monitoring terminal pressure measurement with earth1006 remote monitoring terminal flow measurement with earth1006 remote monitoring terminal

Level                         Well Cover                     Pressure                         Flow

Solar Power Application

solar power application with earth1006 remote monitoring terminal outline dimension of earth1006 remote monitoring terminal solar application

Solar Panel Power

Solar Panel Dimension

Solar Panel Material

Pole Dimension

Mounting bracket&Pole

12V/20W

465×350×17mm

Monocrystal silicon

Suggested DN100 pole, about 3 meters high

The customer could design and prepare

Notes:Customers can purchase the solar panels by themselves referring to the above specifications. A pair of cable connectors can be provided by the company.


Order Guide

Earth1006

Remote Monitoring Terminal

 

 

Code

Communication mode

G2

2G

GC

Multi-Bands in China

GE

Multi-Bands in EMEA/Korea/Thailand/India

GA

Multi-Bands in North America

GS

Multi-Bands in South America/Australia/New Zealand/Taiwan

GN

NB-IoT

L

LoRa [433/470/868(Europe)/ 915(USA)MHz]

传输频率:410~510/862~1020MHz

 

 

 

Code

Antenna type

A1

Integrated antenna(Suggested)

A2

External suction antenna(Antenna length 3m)

 

 

Code

Power supply

B

Non-recyclable battery(Suggested)

C

Rechargeable Battery(12V/20Ah)

D

DC Power(12V DC)

E

12VDC External power adapter(110V~240V AC 50/60Hz)

A

220V AC Power(110V~240V AC 50/60Hz)

S

20W Solar Power (Customers purchase by themselves )

 

 

Code

Interface Types

R4

1*RS485, can be extented to 3 channels(1-ch as Default)

xAI

x means any number among 1~3, represents 1~3 ch 4~20mA input(1-ch as default)

yAU

y means any number among 3-x, represents 1~3ch 0~5V input(0-ch as default)

zDI

z means any number between 1~2, represents 1~2 ch DI/PI input(0-ch as default)

Ca

1*Camera, only support MST071 Camera(0-ch as default)

 

 

Code

Software service type

M

Micro sensor big data platform

C

Customer self-built platform

 

 

 

Code

SIM card

S1

Additonal IoT network card (available for domestic users only )

S2

Self-owned SIM card

 

 

Code

USB to RS485 Serial cable

U1

Recommended and need to be purchased separately

U2

User-supplied, and Z-TEK Lite ZE628 suggested

 

 

Earth1006 G1 A1 B R41AI M S1 U1 The whole spec.


Notes

1. The factory default interface is 1*RS485, 1*AI. If you need more interfaces, please note in the order.

2. For the number of AI, AU interfaces, x+y=3, namely, the maximum interface number of the analog input is 3, and the AI interface is an independent interface, which cannot be extended by the junction box;

3. The maximum number of openings at the bottom of the housing is 4. When the total number of RS485, AI/AU, DI/PI, and Ca interfaces is more than 4, you need to purchase an external junction box. For details, please refer to the MST091 waterproof junction box. Please note in the order;

4. For products with RS485 interface, customers need to provide the Protocol;

5. If Lora version is needed, please note the area of application. There is no need to install SIM card, but need to be used matching with an Earth1004;

6. For sensor and specification selection, please refer to the corresponding datasheet;

7. There is only 1pc of BD9 configuration line packaged along with each order. If extra lines are required, please note in the order;

8. If User need to configure products, please purchase the USB to RS485 serial cable separately (Z-TEK Lite ZE628 suggested). There is only 1pc of USB to RS485 serial cable packaged along with each order;

9. Any special requirement, please contact us and note in the order.


Related Products