How is a High Precision Flowmeter Born?

Date: 2022-Jan-29

First of all, the internal sensor of the electromagnetic flowmeter is assembled into a semi-finished product with the converter after the welding is completed. The staff will assemble the flowmeter on the calibration pipeline. The calibrated parameters are configured through the advanced software system. After the parameter setting is completed, the system starts to enter the state of automatic operation.

The system will first dynamically balance the water temperature, and then the water will flow through the calibration pipeline for at least 15 minutes. After the temperature sensor and pressure sensor in the system detect the standard parameters set before, the meter goes into the calibration state.


During calibration, within a certain period of time, the water in the pipeline passes through the flow meter and then flows into the container. Through the precise coordination of the collector, commutator, and container, the system can collect accurate physical quantities. Then calculate the sensor coefficient through the calibration software and write the coefficient into the meter through RS485. At this time, a high-precision electromagnetic flowmeter is calibrated.

After the entire flowmeter is produced and calibrated, Micro Sensor is equipped with a professional warehouse center and logistics team to ensure the final delivery of the product. After the product is delivered to the site, we will also be equipped with professional application engineers to provide on-site guidance or remote installation guidance services.

High Precision Flowmeter 

Nowadays, the electromagnetic flowmeter developed by Micro Sensor has been used in various fields, such as the MFE600E electromagnetic flowmeter. It can be widely used in petroleum, chemical industry, metallurgy, water supply and drainage, steel, coal, papermaking, and food, textile, environmental protection and other industrial departments and municipal management, water conservancy construction and other fields, the measurement accuracy is high, the reliability is high, the stability is good, and the service life is long.

In the process of product structure, material selection, manufacturing process, production assembly and factory testing, Micro Sensor pays attention to every link to ensure the long-term high quality and high quality of products. The product adopts a liquid crystal display with backlight and wide temperature zone, which has complete functions and practicality, intuitive display, convenient operation and use, and can reduce the trouble of on-site installation, use and maintenance.


In addition, Micro Sensor can also provide more customized solutions and products to meet various integration needs based on actual working conditions. Please feel free to contact us.


Previous posts: Intelligent Monitoring Solutions to Industrial Gases

Next chapter: What is Pressure Hysteresis?

Related Products

Separated Electromagnetic Flowmeter

Water Pressure Transmitter

Volume flux measurement
RS485 communication protocol
RS232 communication protocol

more info...

Electromagnetic Flowmeter

Water Pressure Transmitter

Flange type: DN6~DN1600
Flange, Sanitary, Threaded, Clamping type available
Battery-powered, solar-powered optional

more info...

Electromagnetic Heat Flowmeter

Water Pressure Transmitter

Diameter: DN25 ~ DN400
Nominal pressure: 0.6MPa/1.6MPa/4.0MPa
Lining material: Neoprene, Polyurethane Rubber, F4, F46
Electrode material: 316L, Ti, HB/HC, Ta, WC, Pt
Structure type: separated type, integrated type

more info...

Electromagnetic Flow Meter

Water Pressure Transmitter

The measurement accuracy will not be influenced by changes of fluid density, viscosity, temperature, pressure and electrical conductivity
Open flow without moving parts in measuring pipe, no pressure loss
Corrosion- and wear-resistant electrode and lining materials available
Multi-electrode structure, high precision

more info...


Contact Us

If you still can't find what you're looking for, please contact us with more details so that we can provide you with a suitable solution.


No. 18, Yingda Road,
Baoji, 721006,Shaanxi,P.R.China

German Subsidiary
Micro Sensor GmbH
Girardetstr. 6, D-45131 Essen, Germany

Tel: +86-29-88346384
Whatsapp: 15114817352