Differential Pressure Transmitter for Oxygen Pressure Measurement
0bar~0.35bar...35bar
Accuracy: ±0.5%FS
Oxygen DP Measurement
MDM491
Used For
Petroleum, Chemical, Electricity, Hydrology
Leave a MessageMDM491 Differential Pressure Transducer is a silicon oil filled full stainless steel structure design pressure measurement sensor. The piezoresistive effect of semiconductor silicon material can realize the conversion of differential pressure and electrical signal. MDM491 is more suitable for low pressure differential measurement of various gases and liquids in petroleum, chemical, electric power, hydrological and other pipelines. The product can measure the maximum low pressure differential value of 20bar. MDM491 connector type supports external adjustment of zero point and full scale. MicroSensor's temperature compensation and aging screening processes ensure the stable performance of differential pressure products.
Features
• Low range differential pressure measurement
• IP65 protected
• Welded structure, fully sealed
• Piezoresistive differential pressure sensor
• Stainless steel 316L isolation diaphragm
Image:
MDM491 Differential Pressure Transducer is a silicon oil filled full stainless steel structure design pressure measurement sensor. The piezoresistive effect of semiconductor silicon material can realize the conversion of differential pressure and electrical signal. MDM491 is more suitable for low pressure differential measurement of various gases and liquids in petroleum, chemical, electric power, hydrological and other pipelines. The product can measure the maximum low pressure differential value of 20bar. MDM491 connector type supports external adjustment of zero point and full scale. MicroSensor's temperature compensation and aging screening processes ensure the stable performance of differential pressure products.
Features
• Low range differential pressure measurement
• IP65 protected
• Welded structure, fully sealed
• Piezoresistive differential pressure sensor
• Stainless steel 316L isolation diaphragm
The roots flowmeter is the critical equipment in the system of urban gas gate station. As the basis of gas billing, roots flowmeter can accurately calculate the flow of natural gas. It is equipped with pressure transmitter with high accuracy, so as to guarantee the flow accuracy.
more info...The MVR evaporation equipment requires the use of intelligent pressure transmitters to monitor the liquid level in the separator for feed control. It also monitors the liquid level in the condensate tank, providing timely water replenishment for the condenser, allowing it to condense rapidly. Concurrently, the liquid level height of the raw material tank and the mother liquor tank is monitored. When the liquid level is depleted, raw liquid is added to maintain the normal progress of the process. Intelligent temperature transmitters are used to monitor the steam temperature in the heater, continuously heating the raw liquid for the separation of the solution and the solute. It also monitors the temperature of the separator cavity for efficient separation of the solute and solvent. Flowmeters are used to calculate the volume of the raw material liquid in the feed pump, accumulating the flow.
more info...Due to the highly diffusive, flammable, and explosive characteristics of hydrogen, strict pressure monitoring by pressure transmitters is required to ensure its safety during transportation.
more info...The current comprehensive solution for vadose solution is to adopt vadose solution and membrane concentrated liquid treatment technology, as well as integrated treatment technology for high-risk special wastewater. Monitoring instruments are installed on the treatment equipment to ensure the vadose solution treatment process meets the emission standards, and the data is transmitted to the central platform of the regulatory department.
more info...