Bottle Washing Machine
Bottle Washing Machine

Application Introduction

Before beer bottles, medicine bottles, and condiment bottles are filled with liquid, they need to be cleaned first. The cleaning process is as follows: First, the bottles are filled with lye in the alkali tank to remove most of the stains; then, the bottles are back washed with high pressure using water of different temperatures to wash away the remaining impurities and lye. To ensure the stable operation of the bottle washing machine, the level of the alkali tank needs to be measured by hydrostatic pressure. In addition, the pressure of the alkali tank water inlet pipe and the nozzle pipe also needs to be measured.

Contact Engineer

Application Challenges:

1. The alkaline solution (such as sodium hydroxide solution) in the alkaline water tank is highly corrosive and will corrode the housing, sensitive elements and electrical connections of the transmitter, affecting its long-term stability.
2. Bottle washing machines and alkaline water tanks often produce a large amount of steam and water vapor, and even condensed water, which will cause short circuits or damage to the electronic components of the transmitter.
3. Bottle washing machines and alkaline water tanks usually need to be heated during the cleaning process, especially during the cleaning or disinfection stage. High temperatures will cause thermal stress on the sensitive elements of the transmitter, affecting its accuracy and life service.

 

Solution Advantages:

1. The hydrostatic level transmitter uses 316L stainless steel diaphragm and process connection, which makes the transmitter have good corrosion resistance in alkaline environment.
2. With anti-condensation design and IP67 rating, the hydrostatic level transmitter is automatically discharged when water vapor gathers into water droplets.
3. The transmitter with heat sink and suitable for high temperature environment is optical to effectively achieve physical isolation. Each product has high temperature compensation function to ensure that it can be used in ultra-high temperature and extremely low temperature conditions.

Food Instrumentation for Special Applications
Pressure Measurement
Temperature Measurement
News and Exhibitions
MDM7000 Pressure Transmitters Earns ATEX, CSA C-US and IECEx Certificates
Product Events

MDM7000 Pressure Transmitters Earns ATEX, CSA C-US and IECEx Certificates

Recently, MICROSENSOR's developed and manufactured MDM7000 series smart pressure transmitters have successfully obtained the three major international explosion-proof certifications, namely the ATEX by the CSA Group, the CSA C-US, and ...

Details >
Sensor + Test 2009 International Show Invitation
Fairs

Sensor + Test 2009 International Show Invitation

Micro Sensor Co., Ltd. is going to take part in Sensor + Test 2009 International Show from May 26th to May 28th in Nuremberg of Germany. Our booth is 12/353 (hall/stand). We welcome all customers who are going to be Nuremberg to visit our booth and look our products. Wish to have a nice meet with all of you sincerely.<br><br>​

Details >
Micro Sensor 15 Volunteers Went to Children's Rescue Station
Company Events

Micro Sensor 15 Volunteers Went to Children's Rescue Station

On 31st, May, 2016, 15 volunteers from Micro Sensor Company went to the XinXing Children’ s rescue station in Baoji to bring daily goods and clothes for street kids there.

Details >
Product Introduction-Full Range Piezoresistive Pressure Sensor with Compact Size
Product Events

Product Introduction-Full Range Piezoresistive Pressure Sensor with Compact Size

MPM281 piezoresistive pressure sensor is made of fully stainless steel construction with a high-performance PCB board built-in. This pressure sensor is compact with only 19mm diameter while the pressure range is as wide as 7kpa to 100Mpa. Moreover, customers can use the MPM281 pressure sensor for negative pressure measurement also.

Details >
Micro Sensor Held 2018 Annual Awards Conference Successfully
Company Events

Micro Sensor Held 2018 Annual Awards Conference Successfully

Goodbye to 2018, hello to 2019. Let's prepare for the best and hope for the best!

Details >
MDM7000 Pressure Transmitters Received ABS Certificate
Product Events

MDM7000 Pressure Transmitters Received ABS Certificate

Recently, MICROSENSOR's MDM7000 Pressure Transmitters, MPM489 Pressure Transmitter, MPM426W Level Transmitter, MTM4831 Temperature Transmitter, and MFC608 flowmeter have successfully obtained certification from the American Bureau of S...

Details >
MDM7100 Pressure Transmitter of Micro Sensor: a Finalist of the Best of Industry Awards 2024
Product Events

MDM7100 Pressure Transmitter of Micro Sensor: a Finalist of the Best of Industry Awards 2024

On January 16, 2025 (local time in Würzburg, Germany), the Best of Industry Award 2024 award ceremony came to a successful conclusion! We are honored to announce that Micro Sensor Co., Ltd.(Micro Sensor) has been a finalist for the Be...

Details >
Anti-corrosive Pressure Sensor for Corrosive Media Pressure Measurement
Product Events

Anti-corrosive Pressure Sensor for Corrosive Media Pressure Measurement

Along with the general use of pressure sensors and pressure transmitters, Micro Sensor also supplies a series of pressure sensors with different materials for corrosive media pressure measurement such as Stainless Steel, Hastelloy C, Titanium, Tantalum. Besides you can contact sales engineers for custom design pressure sensors to suit your unique applications.

Details >
Industries

Contact Us

If you still can't find what you're looking for, please contact us with more details so that we can provide you with a suitable solution.

MICRO SENSOR CO., LTD


Headquarters
No. 18, Yingda Road,
Baoji, 721006,Shaanxi,P.R.China

German Subsidiary
Micro Sensor GmbH
Girardetstr. 6, D-45131 Essen, Germany

Tel: +86-29-88346384
Whatsapp: 15114817352
Email: sales@microsensor.cn