Wind turbine generator require a control system to optimize the direction of the turbine in accordance with the wind direction (yaw control) and adjust the angle of the blades (pitch control). This control system is completed by the cylinder system based on the hydraulic principle, in which the pressure sensor plays an important role.
Contact Engineer1. Measuring products that are stable and durable in harsh working environments of wind turbine generator.
2. The sensor needs to be able to withstand temperature changes, resist high vibration, and be compatible with hydraulic fluid media.
1. Offering high-accuracy products specifically designed for wind turbine generator, applicable to situations where both differential pressure and pressure need to be measured.
2. Durable, with strong shock and vibration resistance.
Range: -1bar...0bar~0.1bar...1000bar
General / Flush Diaphragm
CE, RoHS, ATEX approved
16bar~1000bar
Compact structure and cost-efficient
Wide working temperature range
Range: 0.4bar~30bar
Output Signal: 4mA~20mA DC+HART
Working Temperature: -10℃ ~85℃
Temperature Ranges: -200℃…0℃～ 500℃
Accuracy: ±1.0%FS, ±0.5%FS, ±0.25%FS
Available for customization
Industrial grade thermal resistance
Flange type: DN6~DN1600
Measurement Accuracy: ±0.2%(DN10~DN350); ±0.5%(DN6~DN1600)
Micro Sensor Provides a high stable pressure transmitter with high level EMC compatibility and explosion-proof design.
Details >
From November 15th to 17th, Micro Sensor went to Singapore to participate in the largest oil and gas industry event in Asia - OSEA2022.
Details >
The electronic gas volume corrector obtains the pulse signal from the gas meter, dynamically detects the temperature and pressure of the local medium, and corrects the standard instantaneous volume flow rate and standard volume total of the output gas through automatic compensation and compression factor. The gas volume corrector uses high-precision pressure and temperature instruments to ensure the accuracy of gas flow measurement.
Details >
The flow switch is widely applied in industrial measuring and control fields. Along with the development of technology, Micro Sensor upgrades a brand new MFM500A flow switch. It is more user-friendly and won a good reputation from our customers.
Details >
Miconex 2005 was ceremoniously held at Shanghai Everbright Convention and Exhibition Center from Sept.13 to Sept.16, 2005. The exhibition is a high level fair in this fields, about 500 domestic and aboard exhibitors present.
Details >
The operation condition under the well is very complex and rugged. Customers need to measure level, environment temperature, liquids flow message, the well cover condition as well as the whole condition under the well. In order to monitor the site condition and make adjustments in time, a remote monitoring system helps a lot. remote monitoring system is a suitable choice.
Details >
Micro Sensor offers flow meters ranging from DN10~DN500, suitable for flow measurement of liquid-solid, wasted water sewage, slurry, pulp, coal slurry, etc.
Details >
Micro Sensor provides MPM4501 pressure transmitter specialized for variable frequency water pump application.
Details >
Copyright © 2023 MICRO SENSOR CO., LTD
