EN

WhatsApp: +86-18592028735  |   Contact Us

Piezoresistive Pressure Sensor

MPM280

  • · Φ19x15mm
  • · 0bar~0.2bar…1000bar
  • · General
  • · Piezoresistive pressure sensor MPM280 is a silicon oil-diffused type pressure sensing element...
Used For

Piezoresistive pressure sensor MPM280 is a silicon oil-diffused type pressure sensing element. It is fully stainless steel constructed with ranging from 0.2 bar to 1000 bar, with long-term stability, constant voltage, and current supply

Inquire

MPM280

  • Φ19x15mm
  • 0bar~0.2bar…1000bar
  • General
  • Piezoresistive pressure sensor MPM280 is a silicon oil-diffused type pressure sensing element...
  • Used For

    Piezoresistive pressure sensor MPM280 is a silicon oil-diffused type pressure sensing element. It is fully stainless steel constructed with ranging from 0.2 bar to 1000 bar, with long-term stability, constant voltage, and current supply

    Leave a Message

     MPM280 piezoresistive pressure sensor has a robust housing made of stainless steel, 316L, giving them optimum long-term stability for a range of OEM applications. The stainless steel 316L corrugated diaphragm is welded on the front, separating off the pressure sensing chip, which is made of silicon, from the measuring medium. Every silicon oil-diffused type pressure sensor is measured over the entire pressure and temperature datasheet and is supplied with a specification label.

    The outline, installation dimension, and sealing method of General MPM280 are strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and FKM.

    Electrical Performance
    • Power supply: ≤2.0mA DC
    • Electrical connection: φ0.5mm Kovar pin or 100mm silicon
    rubber flexible wires
    • Common mode voltage output: 50% of input (typ.)
    • Input impedance: 3kΩ~8kΩ
    • Output impedance: 3.5kΩ~6kΩ
    • Response (10%~90%): <1ms
    • Insulation resistor: 100MΩ@100V DC
    • Overpressure:2 times FS or 1100bar(min. value is valid)

     

     




    Image:

    Anti-corrosive Pressure Sensor

     MPM280 piezoresistive pressure sensor has a robust housing made of stainless steel, 316L, giving them optimum long-term stability for a range of OEM applications. The stainless steel 316L corrugated diaphragm is welded on the front, separating off the pressure sensing chip, which is made of silicon, from the measuring medium. Every silicon oil-diffused type pressure sensor is measured over the entire pressure and temperature datasheet and is supplied with a specification label.

    The outline, installation dimension, and sealing method of General MPM280 are strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and FKM.

    Electrical Performance
    • Power supply: ≤2.0mA DC
    • Electrical connection: φ0.5mm Kovar pin or 100mm silicon
    rubber flexible wires
    • Common mode voltage output: 50% of input (typ.)
    • Input impedance: 3kΩ~8kΩ
    • Output impedance: 3.5kΩ~6kΩ
    • Response (10%~90%): <1ms
    • Insulation resistor: 100MΩ@100V DC
    • Overpressure:2 times FS or 1100bar(min. value is valid)

     

     




    Read / Download our Datasheet in PDF

    MPM280

    Piezoresistive Pressure Sensor

    Related Products

    Air Sampling Pump

    Air Sampling Pump

    20mL/min~1500mL/min
    Accuracy: ±5%FS
    IP54, ABS wholly sealed housing

    more info...

    Insert Type Electromagnetic Flow Meter

    Insert Type Electromagnetic Flow Meter

    Diameter: DN200 ~ DN1600
    Measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity
    The special structure can be installed and disassembled under the condition of low pressure and non-stop water, which is convenient for maintenance and repair
    Low frequency rectangular wave excitation improves the stability of flow measurement

    more info...

    Electromagnetic Heat Flowmeter

    Electromagnetic Heat Flowmeter

    Diameter: DN25 ~ DN400
    Nominal pressure: 0.6MPa/1.6MPa/4.0MPa
    Lining material: Neoprene, Polyurethane Rubber, F4, F46
    Electrode material: 316L, Ti, HB/HC, Ta, WC, Pt
    Structure type: separated type, integrated type

    more info...

    Differential Pressure Transmitter for Oxygen Pressure Use

    Differential Pressure Transmitter for Oxygen Pressure Use

    0bar~0.35bar...35bar
    Accuracy: ±0.5%FS
    Oxygen DP Measurement

    more info...

    .

    Related Applications

    Contact Us

    If you still can't find what you're looking for, please contact us with more details so that we can provide you with a suitable solution.

    MICRO SENSOR CO., LTD


    Headquarters
    No. 18, Yingda Road,
    Baoji, 721006,Shaanxi,P.R.China

    German Subsidiary
    Micro Sensor GmbH
    Girardetstr. 6, D-45131 Essen, Germany

    Tel: +86-29-88346384
    Whatsapp: +86-18592028735
    Email: sales@microsensor.cn

    Search

    Leave a message

    Thank you for visiting us. Please leave a message and we will reply by email!