IIC Pressure Sensor
Range:0bar~0.07bar…1000bar
Accuracy: ±0.25%FS
Digital IIC output
MFE600
Used For
The MFE600 electromagnetic flowmeter is suitable for flow measurement of conductive liquids like wasted water etc. It has a flange type fitting, DN10 to DN1400, for use in petroleum, chemical, metallurgy, water supply, and drainage.
Leave a MessageMFE600 intelligent electromagnetic flowmeter is a volume flux measurement instrument. Ranging from DN6 to DN1400, the electromagnetic flow meter is CE marked, outputs analog 4mA ~ 20mA DC and digital HART, RS485. MicroSensor has a 35m high water tower as a voltage regulator for actual flow calibration. Professional electromagnetic flowmeter production lines ensure mass production and long-term high quality.
Image:
MFE600 intelligent electromagnetic flowmeter is a volume flux measurement instrument. Ranging from DN6 to DN1400, the electromagnetic flow meter is CE marked, outputs analog 4mA ~ 20mA DC and digital HART, RS485. MicroSensor has a 35m high water tower as a voltage regulator for actual flow calibration. Professional electromagnetic flowmeter production lines ensure mass production and long-term high quality.
Accuracy: ±1.0%FS
Medium Temperature: -200℃~ 500℃
Output: 4mA ~ 20mADC, RS485, HART
Flange type: DN6~DN1600
Flange, Sanitary, Threaded, Clamping type available
Battery-powered, solar-powered optional
Fully welded structure, FFKM sealing ring and various cables like PUR, PFA optional
Output mode: 4mA~20mA, 1V~5V, 0.5V~4.5V...RS485-Modbus, etc.
Magnetic end cap for mobile tanks measurement and NPT1/4 male thread connection for side mounting of tank bottom
Low power consumption
The main function of the gas regulator is to adjust the higher gas inlet pressure to the set lower gas outlet pressure. With a series of changes in gas consumption and inlet pressure, the gas regulator will automatically keep the outlet pressure value within a certain range and play a stabilising role. The pressure transmitter is the core component of the regulator.
more info...Water storage tank level, pipeline pressure, and flow within the pumping station can transmit status data to the platform via wireless networks. When anomalies are detected, the platform timely alarms. The staff handles fault information immediately. It ensures the normal operation of the water supply system.
more info...During the process of oil and gas transportation, it is necessary to collect and analyze production and security data related to pipelines and production sites, and generally a supporting SCADA system needs to be built simultaneously. The SCADA system can monitor, control and manage the flow rate, pressure and temperature of the entire pipeline in real time, in order to achieve safe transportation, reduce consumption and improve economic efficiency.
more info...Pressure Transmitters are needed to monitor the pressure in the gas supply pipeline of the compressed gas cylinder to ensure safety.
more info...